For washer game

Simply flip the box section upside down and set the base section on it with the PVC down inside the box. Again I recommend drilling pilot holes to prevent cracking and splitting. That completes the assembly of the washer toss game boxes. The only thing left to do is to get the washers ready to go. As shown above we use four washers for each team, for a total of eight washers. You have to be able to easily distinguish the washers from one another. One of the best ways to do this is to paint them.

The washers take a beating hitting themselves, the box, and the surrounding area. The best part is these marks will last much longer than the paint. If you play frequently, this could be a little easier. With that said, I will share the house rules that we, along with our family and friends, have settled on for play. The key here is to settle on your rules and scoring before starting. We place the boxes approximately 21 feet apart 7 paces. Each team has a player at each end of the play area.

To determine which team starts each team has one player toss a washer and the team with the closest washer to the box goes first. If you want to flip a coin or play Rock, Paper, Scissor, you can do that too if you like.

Only one team scores per end scoring is covered below. We feel there is an advantage of being able to see what you have to beat, so we play that the team scoring points throws last on the next throw.

When it comes to scoring in washers, there are as many variations to scoring as there is to how the game is played and the boards themselves. The beauty of it is you can determine your own house rules and play the game how you like. I will mention a couple of other popular playing options below that you may want to incorporate into your scoring and rules. In our version of the game, we can score either 1 point, 2 points, or 3 points. Get a washer inside the box, but not in the center PVC cup, you receive 2 points.

If your washer lands in the PVC cup you score 3 points. This scoring is a little different than how some play. Some award 1 point for landing inside the box and 3 points for landing inside the PVC. Either way is fine, just get it established before play begins. Simply put, only one team score points per end.

Using the point-scoring above, if the first team scores 4 points and the second team scores 6 points, then team two scores a total of 2 points for that end. The points from each end add up until one team reaches the winning score. Should one player or team reach 11 points before the opponent scores a single point, the game is called a skunk and the player or team with zero points is out of the competition. With two players or teams, and one reaching 11 points before the other scores, the game is finished.

With 3 or more players, for example, it is possible to skunk individual players, but not all players. In this example, the game continues with players that have not been skunked.

Should one player or team score 17 points while the opponent has scored only 1 point, the game is called a whitewash and the player or team with only 1 point is out of the competition.

In competition with 2 or more players or teams, it is possible to whitewash some but not all contestants. When one player or team reaches 21 or more points before the opponent reaches 20 points, the game has gone full-term and the team or player with 21 or more points is declared the winner. When a player or team reaches 20 points before the competition, they have achieved my add or their add and reverts to last in the throwing order.

Games that go to add must be won by at least 2 points. The adhesive tube will be found near the caulk in the store. All products featured are carefully reviewed and selected by our editors. As an Amazon Associate, we earn a commission from qualifying purchases. Edit Page Bad generic Bad formatting Bad editorial. How to Build a Washer Toss Game Set This easy woodshop project will yield hours of family fun - here's how to make your own washer toss game set!

Written by Dean Kuczynski. Everyone enjoyed fishing , swimming, canoeing, going on frog hunts, and making up games. My daughter, her friends, and all of my friends and family will attest to that. To keep your score you can use different things depending on how sophisticated you want your game to be. A simple piece of paper and a pen would suffice.

You can order different scoreboards online or you can even build one on your own. All you need is some plywood and a couple of markers and some sort of scoring clips. Again, it all depends on your affinities. You can even find some scoreboards with cup holders, how neat is that!

The first team or player that reaches 21 points is the official winner. For instance, if you have a score of 18 points and you score an additional 5 topping 21 , your previous score will be reduced by 5 leaving you with Start by wrapping your thumb and forefinger around the washer.

The official game field should consist of 2 pits, where each one of them contains a cup of 4 inches in diameter. The official distance from the cup centers is precisely 25 feet. Each player will get precisely three washers. Washer game is super easy to build.

All you need material-wise is some plywood, glue and a rope. Of course, this is all optional and not really necessary. But if you have the time and the will to build something on your own, this is the perfect opportunity. All your friends and family will enjoy the game, even more so if they know you built it with your own two hands. We already mentioned a simple washer pit that you can build in the text above.

This is just going to be a little step-by-step guide to help you out in your endeavor. You can probably get almost everything you need from a local home improvement store.

Your first task is to clear out any grass in the pit area. After that, lay down your wood in order to get an idea where to dig out the space for your planks.

Just dig straight lines, lay your planks in, and keep digging until they sit at a depth you think is suitable. Hold two planks flush together and start hammering. The planks should feel solid at this point. All you have to do now is to push in the surrounding dirt until the pit is comfortably snub in the ground. Repeat the whole process one more time and start playing washers! You can cut the eight 2x4 pieces from two 6-foot boards.

The same goes for the plywood squares. Spray two o r three coats of spar urethane on them. Place the carpet square in the box using an all-purpose adhesive to secure it to the plywood.

Then, apply a bead of the adhesive to the bottom of the PVC coupler and glue the cut-out carpet circle inside. Cut the carpet into two 13xinch squares. After that just cut out the outer circle. There are many useful sites that offer different DIY project plans and we certainly advise you to take your time and pick what you think is best for you. There are many ways to cover your washer boards to make them look even better. You can use all sorts of paint and sprays or even put a layer of outdoor carpet on them.

The carpet can add a certain feel to it and it will also absorb the hits. One way to make your wooden boards look old and cool is to put a layer of black tea on them. Just make a pot of tea and let it cool down. Then apply a thin layer of it on the wood and leave it to dry. The oxidation will do the rest.

And, when they wear out which is pretty much inevitable , give them one more layer of it. You can even create the can in washers by using a large coffee can. Every washer you throw into the can carries 2 points, while every washer that goes outside the box grants you one single point.

If you want to buy washers and start playing the washer toss game, we recommend doing it via Amazon. Most importantly, what separates you from the washers you want is a couple of mouse-clicks. So go ahead and get yours right away!

Share Pin.